Hand laid Fiberglass Saddlebags with Universal Mounts
   Fiberglass Saddle Bags Sold as a kit - Easy to install -
   
Motorcycle Hard Saddlebags Available in two sizes
    Hardbags.com is a division of
Wittco Enterprises, Cabot, Arkansas
    
www.wittcoenterprises.com
                  MM02 Hardbags dimensions (inches): lid opening = 8 X 17    Overall length = 22.75     Height = 12     
                        MM02  Price per set within the lower 48 is $335.00
Plus $30.00 Shipping
                                   
Email for shipping charges to Alaska, Hawaii, and International orders                                    
                       For International orders and for
              shipments to Hawaii and Alaska

   Email me (rw@wittco.net) with your name, street address, and country
   (for international shipments) & I will figure the exact shipping amount
   (from www.usps.com  ) and will have an invoice sent from PayPal to
     you for the total. You may then pay with your credit card through
       PayPal or send a check or money order to the address below.
                 
 



 





 
Phone:    501-590-9483
Hard Saddlebag Photo Gallery  Page 1
 Wittco Enterprises
5220 Kerr Station Rd
  Cabot, AR  72023
Wittco Enterprises 1982 - 2010
Hard Saddlebags Photo Gallery  Page 2

 

Slideshow
   
About Wittco
 click
Here
   Useful Links

  VTX Owners Website
Kawasaki Vulcan Owners
  Kaw Vulcan Fixit Site
Boulevard Owners Site
Honda Shadow Owners
  Yamaha Star Owners
  Jireh Cycles.com
    BatWing Fairings
Motorcycle Accessory Whse
    Motorcycle Paint
Phat Performance Parts.com
 Discount Cycle Parts
    BikeBandit.com
CruiserCustomizing.com
   Scootworks.com
     Easy Brackets
    Ghost Brackets
   Dennis Kirk.com
Motorcycle Superstore.com
JC Whitney Motorcylce.com
    J P Cycles.com
Motorcycle Helmets
MM08 Motorcycle Hardbags dimensions (inches): lid opening = 8 X 17   Overall length = 23    Height = 13.5
      MM08  price per set within the lower 48 is $380.00 Plus $30.00 Shipping
           Email for shipping charges for Alaska, Hawaii, and International orders               
Click the 'Add to Basket' button to order the standard bag MM02
Click the 'Add to Basket' button to
order the deeper bag
MM08
For Deeper Bag (MM08)
Photo Page
Click Here
   Dimensions and info on the
  Motorcycle Hard SaddleBag
   for both the MM02 & MM08
      Scroll down or
click here
Click to Email Us
Lid Luggage Racks and Side Guards now available for Motorcycle Hard bags For photos and ordering information please click here
The photo above shows the MM08 bags with optional lid racks and side guards
        These work well as Harley Davidson Hard bags on Softail and
Dyna models. Our Harley Davidson Hardbags
Will not work on RoadKings
These Motorcycle Hard Saddle Bags with universal mounts have been proven to work on all modern cruisers with fender rails

             Product Information for Motorcycle Hard Luggage
Bags are fresh from the molds and will need to be prepped for painting. Painting fiberglass is much the same as painting a fender on a car. Block sand, prime, sand & paint. They are hinged in the front, with a chrome plated locking latch at the rear. The latches are keyed alike. The bags are fully assembled, however, the hinges and latches are bolted on so you can easily remove the hardware for painting the bags. The mounts are made of aircraft quality aluminum with a brushed finish and are quite sturdy. You can easily carry 15 pounds per side.




                                          
Hard Motorcycle Saddlebags Measurements:
MM02  The lid opening of the smaller bag is approximately 8 X 17 inches. The overall height including the lid is about 12  inches. The slant on the front and rear of the bag is 33 degrees, (or 57 degrees, depending on how you measure),  which gives the bags an overall length of about 22.75 inches. Both sizes use the same lid.
 

MM08  The lid opening of the deeper bag  is also 8 X 17 but is 1 1/2 inches taller/deeper/ higher, however you want to say it, for a height of 13.5 inches. The overall length is about 23 inches.  Both sizes utilize the same lid.




                      These Hard Saddle bags are Sold as a KIT
The customer does the painting and configuring the mounts. Since the mounts are universal, the customer has to use his/her judgement on the exact position of the bags, drill the bags, and add the correct spacers (not supplied) if necessary.  On some bikes, longer bolts (not supplied) are required to attach the mounts to the fender rails. Complete instructions are provided with each set or an email copy can be sent on request.
We do everything in house so that we can keep the price as low as possible. However, we don't do the custom painting of the bags at our facility. This allows the customer to find a local shop where custom graphics and colors can be applied. This way, if you get a scratch or ding, you can easily go back to the local shop and get a touch-up. You can also order factory matched paint online at Color Rite if you prefer. Some auto paint stores can analyze the paint from your bike using a spectrometer and mix up a perfect or near perfect match. You usually have to carry a side cover or other part into the store for them to analyze.